BLACK FRIDAY SALE: 30% OFF SITEWIDE — Automatically Applied at Checkout | Ends November 30

Why Dentists Prefer Digital Dental Files (And Why You Might Too)

A

by Ashely Notarmaso

November 21, 2026

Share this
Why Dentists Prefer Digital Dental Files (And Why You Might Too)

Digital Dentistry, Made Useful

If your dentist or orthodontist has already created a detailed digital record of your teeth, you may not need to begin again with an at-home impression. The right scan file can give a lab a clear starting point—and give you one less thing to do.

Updated November 2026 · 6 min read


What a digital dental file actually is

A digital dental scan is a three-dimensional record created with an intraoral scanner in a dental or orthodontic office. Rather than taking an impression with material in a tray, the provider uses a small handheld scanner to capture the visible surfaces of the teeth and surrounding anatomy.

The office’s software stores that scan within its own system. Many platforms can also export a copy in an open format, most commonly STL or PLY. That export is the part that can be shared with a compatible dental laboratory.

It is not a photograph, screenshot, or patient-portal preview. It is a file containing the three-dimensional geometry needed to evaluate whether a lab has enough information to fabricate a custom appliance.

A digital file does not replace a dentist’s judgment. It simply makes the dental record easier to review, retain, and—when appropriate—share.

Why many dental offices prefer a digital record

It is easier to revisit

A well-captured scan gives the office a detailed 3D record that can be reviewed within its software later. Unlike a physical impression, the original file is not affected by shipping or handling. That can be useful when an office is comparing records, planning treatment, or helping a patient obtain a replacement appliance.

It can move into a compatible lab workflow

When an office can export an STL or PLY file, that record may be sent to a compatible lab for review. This is especially practical for patients who have already been scanned for Invisalign, retainers, restorative work, or routine digital records and now need a custom appliance from an outside laboratory.

It can spare a patient duplicate work

If a recent scan accurately represents a patient’s current teeth, there may be no reason to create another record simply to begin a new order. A lab still needs to review the file, of course. But the possibility of using a record that already exists is a meaningful convenience.

Why you might prefer it, too

For patients, the appeal is refreshingly practical. You may be able to skip impression material, avoid mailing a physical impression back, and move directly to the lab-review stage with a record your dental office already has.

  • You may be able to use a scan already on file at your dentist or orthodontist.
  • You can avoid taking a separate at-home impression if the submitted scan qualifies.
  • It can be especially helpful if you dislike impression trays or tend to gag.
  • Your dental team can confirm whether a recent scan exists and whether it can be exported.

Not every digital file is ready to use

The file extension alone does not make a scan usable. An STL or PLY file still needs to be complete enough for the appliance ordered, compatible with the lab workflow, and representative of your current teeth.

Before Sentinel moves a digital case into production, the lab reviews factors such as whether the appropriate arches are available, whether relevant teeth and anatomy are adequately captured, and whether the scan can be used for that specific appliance.

One other question matters just as much: Does this scan still represent your teeth today? Digital files do not degrade, but teeth can change. Orthodontic movement, new restorations, extractions, changes in bite, and new crowns or veneers can all affect whether an older record remains appropriate.

If your scan is not recent, that does not automatically rule it out. Read Can I Reuse an Old Digital Scan for a New Night Guard? for the practical factors our lab considers.

Digital scan or at-home impression?

A digital scan may be a good fit when… An at-home impression may make more sense when…
Your dentist or orthodontist has a recent scan of your current teeth. You do not have a recent professional scan available.
The office can export STL or PLY files for lab review. The office cannot export the scan in a compatible format.
The scan appears complete and appropriate for the appliance ordered. Your teeth have changed since the scan was captured.
You would prefer to use an existing dental record. You prefer to make a new record from home.

Neither route is inherently “better.” The useful question is simply whether you already have a current, qualifying record that can serve as the starting point for your order. For a closer comparison, read Impression vs. Digital Scan for a Custom Night Guard.

What to ask your dental office

You do not need to know which scanner the office uses. This short message is enough:

Copy and paste

“Hi! I’m ordering a custom dental appliance from an outside lab. Do you have a recent digital intraoral scan of my teeth, and can you provide it as STL or PLY files? If both arches were scanned, I would appreciate files for the upper and lower teeth. Thank you!”

Do not convert the files yourself or send screenshots of the digital model. The original export from the office is best. Once you choose the digital-scan option during checkout, Sentinel will provide instructions for submitting your files securely.

How Sentinel uses qualifying scan files

Sentinel accepts qualifying STL and PLY files for custom night guards and select other custom dental appliances. If the submitted scan has the coverage and current anatomy our lab needs, it can replace the at-home impression step. The lab reviews the file before fabrication begins.

Already know your scan was created with iTero? Our guide to ordering a custom night guard with an iTero scan explains what to request. If you need help obtaining the export, start with our guide to sending STL or PLY dental scan files. And if you are not sure whether your dental office’s scanner can provide an open export, see our dental scanner compatibility guide.

Frequently asked questions

Can I use an old digital dental scan for a new night guard?

Possibly. The file must be complete enough for the appliance ordered and still reflect your current teeth. Changes from orthodontics, restorations, tooth movement, or a changing bite may mean a newer record is needed.

Does Sentinel accept every kind of dental scan?

Sentinel commonly accepts qualifying STL and PLY exports. The lab reviews each submitted file for compatibility, coverage, and suitability before fabrication.

Can I send screenshots from my dentist’s patient portal?

No. Screenshots are not usable for custom fabrication. Ask the office for the original 3D scan export as an STL or PLY file.

Do I still need to see my dentist?

A digital scan does not replace dental care. See your dentist for pain, jaw symptoms, loose restorations, bite changes, active orthodontic treatment, or any concern about whether a night guard or other appliance is appropriate for you.

The useful question to ask

Digital dentistry can sound more complicated than it is. If your dentist or orthodontist has scanned your teeth before, the only question you need to begin with is: “Can you provide my scan as an STL or PLY file?”

If the scan is current, complete, and appropriate for your order, it may save you an extra step—and allow Sentinel’s lab to begin with a precise record your dental team has already created.

Editorial note: This article is for general educational purposes and is not a substitute for an examination, diagnosis, or treatment advice from a dentist or other qualified clinician. Sentinel reviews submitted digital files for manufacturing suitability; that review is not a clinical evaluation or recommendation.